Cisco IP Communications High-Density Digital Voice/Fax Network Module

• Limited Warranty: 90
• Manufacturer/Supplier: Cisco Systems, Inc
• Manufacturer Part Number: NM-HDV2=
• Manufacturer Website Address: http://www.cisco.com
• Brand Name: Cisco
• Product Name: IP Communications High-Density Digital Voice/Fax Network Module
• Marketing Information: Network modules provide enterprises, managed service providers, and service providers with the ability to directly connect the public switched telephone network (PSTN), traditional telephony equipment (such as private branch exchange (PBX), key systems, analog telephones, and fax machines. Supports a VIC/VWIC slot that can be populated with either digital or analog/BRI voice/WAN interface card. Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec. Must be used with up to four PVDM2 Packet Fax/Voice DSP modules.
• Product Type: Network Module
• Application/Usage: Data Networking
• Expansion Slots: 1 x VIC/VWIC
• Daughter Cards: No
• Compatibility: Supported Platforms: 3845 , 3825 , 3745 , 3725 , 2691 , 2600XM Series

Manufacturer/Supplier:	Cisco Systems, Inc
Manufacturer Part Number:	NM-HDV2=
Manufacturer Website Address:	http://www.cisco.com
Brand Name:	Cisco
Product Name:	IP Communications High-Density Digital Voice/Fax Network Module
Marketing Information:	Network modules provide enterprises, managed service providers, and service providers with the ability to directly connect the public switched telephone network (PSTN), traditional telephony equipment (such as private branch exchange (PBX), key systems, analog telephones, and fax machines. Supports a VIC/VWIC slot that can be populated with either digital or analog/BRI voice/WAN interface card. Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec. Must be used with up to four PVDM2 Packet Fax/Voice DSP modules.
Product Type:	Network Module

Application/Usage:

Data Networking

Expansion Slots:	1 x VIC/VWIC
Daughter Cards:	No

Management:	Cisco Voice Manager SNMP protocol compliant Manageable via a MIB browser CiscoView interface for configuration ConfigMaker NetSys supported
Protocols:	SNMP VoIP VoFR VoATM MGCP SIP

Status Indicators:

EN PVDM 0 PVDM 1 PVDM 2 PVDM 3

Temperature:	32°F (0°C) to 104°F (40°C) Operating -13°F (-25°C) to 158°F (70°C) Storage
Humidity:	5% to 85% Non-condensing Relative Humidity Operating

Additional Information:	Voice & Fax Integration Network module contain four 80-pin SIMM sockets for PVDM2s Toll Bypass Support Telephony Interface Signaling Support Cisco SRST maintains basic telephony services at the branch office even if Wan goes down This Module Requires at least one and maximum of four Packet Fax/Voice DSP Module for voice calls Supports a maximum of 60 channels of digital voice, or four channels of analog voice in medium complexity codec The module is Interoperable with the full range of Cisco IP Communications solutions
System Requirements:	Software and Memory Requirements: Cisco 2600XM: IP Plus images and higher 64 MB DRAM 32 MB Flash Cisco 2691: IP Plus images and higher 128 MB DRAM 32 MB Flash Cisco 3700: IP Plus images and higher 128 MB DRAM 32 MB Flash Supported Platforms & Minimum IOS Versions: 3845 - 12.3(11)T 3825 - 12.3(11)T 3745 - 12.3(7)T 3725 - 12.3(7)T 2691 - 12.3(7)T 2600XM Series - 12.3(7)T
Compatibility:	Supported Platforms: 3845 3825 3745 3725 2691 2600XM Series
Certifications & Standards:	FCC Class B device EMC 47CFR15 Subpart B 2002, T1 Safety IEC60950 Telecom 47 CFR part 68, TIA/EIA 968-A

Limited Warranty:

90